Last update on 16.12.2015 Program Version: 2015.G03 RUNSPEC ################### RUNSPEC section begins here ###################### BLACKOIL ^^^^^^ We switch the program to the BLACKOIL EOS module ^^^^^^^^^^^^^^ We enable: WATER - water phase; OIL - oil phase. ROCKCOMP We enable rock compaction. CAPPRES We enable capillary pressure. ENDSCALE We enable end-points scaling option. / METRIC ^^^^^^^^^^^^^^^^^^^^ We use METRIC units ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ START The start date is 1 Jan 1990 1 JAN 1990 / FAST We use FAST option. GRID ##################### GRID section begins here ####################### The grid is specified within brackets MAKE-ENDMAKE MAKE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< CORNER 13 20 38 / We specify the number of grid blocks along every axis. INCLUDE We load grid file. 'OW2P-RT.GRDECL' / GETWELLS We import well specs from section SCHEDULE. ENDMAKE >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INCLUDE We load Net-to-gross ratio. 'OW2P-RT.NTG'/ INCLUDE We load porosity. 'OW2P-RT.PORO' / INCLUDE We load X-direction permeability. 'OW2P-RT.PERMX' / INCLUDE We load Y-direction permeability. 'OW2P-RT.PERMY' / INCLUDE We load Z-direction permeability. 'OW2P-RT.PERMZ' / ADD We specify permeability in the PERMX 50 4* 38 38 / layer 4. PERMY 50 4* 38 38 / / MULTIPLY MULTZ 0 4* 15 15 / Barrier between layer 1 and 2. MULTZ 0 4* 24 24 / Barrier between layer 2 and 3. MULTZ 0 4* 37 37 / Barrier between layer 3 and 4. / --EQUALS -- MULTPV 999999.0 1 13 1 1 / Uncomment this keyword if you want to -- MULTPV 999999.0 1 13 20 20 / model fluid influx into the domain -- MULTPV 999999.0 1 1 2 19 / through the lateral boundaries. We -- MULTPV 999999.0 13 13 2 19 / multiply the pore volume of all lateral --/ grid blocks by factor 999999.0. ^^^^^^^^^^^^^^^ Regions must be specied in section GRID ^^^^^^^^^^^^^^^^^^^^^^^^ EQUALS FIPNUM 1 / Regions in layer 1. ROCKNUM 1 / SATNUM 1 / / BOX 4* 16 24 / Regions in layer 2. ADD FIPNUM 1 / ROCKNUM 1 / SATNUM 1 / / ENDBOX BOX 4* 25 37 / Regions in layer 3. ADD FIPNUM 2 / ROCKNUM 2 / SATNUM 2 / / ENDBOX BOX 4* 38 38 / Regions in layer 4. ADD FIPNUM 3 / ROCKNUM 2 / SATNUM 3 / / ENDBOX INCLUDE We import equilibration regions 'OW2P-RT.EQLNUM' / INCLUDE We modify saturation functions regions 'ADDSATNUM.INC' / to provide a better fit to history. ------------------------------------------------------------------------------------ RPTGRID PORO NTG PERMX PERMY PERMZ SATNUM EQLNUM ROCKNUM / We report these properties from section GRID. PROPS ####################### PROPS section begins here #################### Rock properties are specified within brackets ROCK-ENDROCK ROCK <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 1 / ROCKTAB 43 0.9884 1 / We specify rock properties in 143 0.9942 1 / layer 1 (ROCKNUM=1). 243 1.0000 1 / 443 1.0116 95 / / ENDROCK >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ROCK <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 2 / ROCKTAB 43 0.9884 1 / We specify rock properties in 143 0.9942 1 / layer 2 (ROCKNUM=2). 243 1.0000 1 / 443 1.0116 100 / / ENDROCK >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ROCK <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 3 / ROCKTAB 43 0.9884 1 / We specify rock properties in 143 0.9942 1 / layer 3 (ROCKNUM=3). 243 1.0000 1 / 443 1.0116 30 / / ENDROCK >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SATOPT Piecewise linear capillary pressure. 10* 1 / The saturation functions are specified within brackets SAT-ENDSAT SAT <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 1 / SWOF -- layer 1 0.0000 0.0000 0.36200 12.000 / 0.0686 0.0080 0.23526 3.3840 / We specify saturation functions in 0.1393 0.0259 0.11401 1.8000 / layer 1 (SATNUM=1). 0.2107 0.0517 0.05600 1.2960 / 0.2814 0.0842 0.03262 1.0440 / 0.3514 0.1231 0.02242 0.9600 / 0.4200 0.1678 0.01465 0.8880 / 0.4900 0.2181 0.00750 0.8640 / 0.5579 0.2737 0.00340 0.7920 / 0.6286 0.3344 0.00061 0.7560 / 0.7000 0.4000 0.00000 0.6120 / 1.0000 1.0000 0.00000 0.0000 / / ENDSAT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SAT <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 2 / SWOF -- layer2 0.0000 0.0000 0.36200 12.000 / 0.0686 0.0080 0.23526 4.7160 / We specify saturation functions in 0.1393 0.0259 0.11401 3.0840 / layer 2 (SATNUM=2). 0.2107 0.0517 0.05600 2.3400 / 0.2814 0.0842 0.03262 1.7040 / 0.3514 0.1231 0.02242 1.3774 / 0.4200 0.1678 0.01465 1.1400 / 0.4900 0.2181 0.00750 0.9240 / 0.5579 0.2737 0.00340 0.7440 / 0.6286 0.3344 0.00061 0.6720 / 0.7000 0.4000 0.00000 0.6000 / 1.0000 1.0000 0.00000 0.0000 / / ENDSAT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SAT <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 3 / SWOF -- layer 3 0.0000 0.0000 0.36200 12.000 / 0.0686 0.0080 0.23526 3.0240 / We specify saturation functions in 0.1393 0.0259 0.11401 1.9200 / layer 3 (SATNUM=3). 0.2107 0.0517 0.05600 1.3320 / 0.2814 0.0842 0.03262 1.1160 / 0.3514 0.1231 0.02242 0.9960 / 0.4200 0.1678 0.01465 0.9000 / 0.4900 0.2181 0.00750 0.7800 / 0.5579 0.2737 0.00340 0.7200 / 0.6286 0.3344 0.00061 0.6840 / 0.7000 0.4000 0.00000 0.5760 / 1.0000 1.0000 0.00000 0.0000 / / ENDSAT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SAT <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 4 / SWOF 0.0000 0.0000 10.000 0.1000 / 0.0686 0.0080 9.0200 0.0931 / We specify saturation functions in 0.1393 0.0259 8.0100 0.0861 / near well fractured zone. 0.2107 0.0517 6.9900 0.0789 / 0.2814 0.0842 5.9800 0.0719 / 0.3514 0.1231 4.9800 0.0649 / 0.4200 0.1678 4.0000 0.0580 / 0.4900 0.2181 3.0000 0.0510 / 0.5579 0.2737 2.0300 0.0442 / 0.6286 0.3344 1.0200 0.0371 / 0.7000 0.4000 0.0000 0.0300 / 1.0000 1.0000 0.0000 0.0000 / / ENDSAT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The fluid properties are specified within brackets EOS-ENDEOS EOS <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< / PVCDO -- refpres boil compro visoil viscoo 243 1.400 0.0001369 1.13 0.003 / / PVTW -- refpres bwat comprw viswat viscow 243 1.0 0.00003 0.32 0 / DENSITY -- Oil Water Gas 822 1000 1* / ENDEOS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INCLUDE We load water critical saturation. 'OW2P-RT.SWCR' / COPY We copy critical water saturation in SWCR SWL / the water connate saturation. / INCLUDE We load water relative permeability 'OW2P-RT.KRW' / vertical end-points. EQUALS The maximal water saturation is 1.0. SWU 1.0 / / INCLUDE We load oil critical saturation. 'OW2P-RT.SOWCR' / INCLUDE We modify oil critical saturation to 'ADDSOWCR.INC' / to provide a better history match. INCLUDE We load initial water saturation. 'OW2P-RT.SWATINIT' / INIT ####################### INIT section begins here ##################### The initial equilibrium is specified within brackets EQL-ENDEQL EQL <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 1 / We specify initial equilibrium EQUIL in region EQLNUM=1. 2360 243 2370 / ENDEQL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> EQL <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 2 / We specify initial equilibrium EQUIL in region EQLNUM=2. 2360 243 2380 / ENDEQL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> EQL <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 3 / We specify initial equilibrium EQUIL in region EQLNUM=3. 2360 243 2380 / ENDEQL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> EQL <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 4 / Only water in region EQLNUM=4 EQUIL (layer 4+). 2360 243 2000 / ENDEQL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> RPTSUM PRES SWAT SOIL DOIL DWAT VISOIL VISWAT / RPTWELL WBHP WOPR WWPR WWCT WOPT WWPT WEFAC WWIR WWIT WLPR WLPT / RPTFIELD FOE FOPR FWPR FWCT FOPT FWPT FOIP FWIR FWIT FLPR FLPT / We save these properties at every report step. RPTSUM SWL SWCR SWU KRW SOWCR PCW SOWL SOWU KRO KROW SWLPC SWUPC EQLNUM SWATINIT NTG CELLVOL I-IJKRES J-IJKRES K-IJKRES / We save these properties only at the first report step. SCHEDULE #################### SCHEDULE section begins here #################### RPTSUM DELETE SWL SWCR SWU KRW SOWCR PCW SOWL SOWU KRO KROW SWLPC SWUPC EQLNUM SWATINIT NTG CELLVOL I-IJKRES J-IJKRES K-IJKRES / We delete these properties from the RPTSUM report list, INSERT K-IJKRES / and add this property back. WEEKTOL We use WEEKTOL option. WBHPRATE Some setups for wells. '*' 2500 / / VARS We specify that PRES DMAX 50 / - maximal pressure alteration is 50 bars; PRES MINV 5 / - minimal pressure is 5 bar; PRES MAXV 450 / - maximal pressure in simulation is / 450 bars. ILUTFILL Some linear solver setups. 5.0 / ILUTDROP 1E-3 / REPORTS No reports in log file. NOTHING / TUNING Next time step is limited to 0.1 days. 0.1 32 0.2 / Maximal time step is 32 days. INCLUDE We read production history from 'OW2P-RT.SCHEDULE' / include file. POST ####################### POST section begins here ##################### CONVERT We convert the output to ParaView compatible format. RPTPOST TIME FOE FOPR FWPR FWCT FOPT FWPT FOIP FWIR FWIT FLPR FLPT / We save consolidated time series report POSTFLD for field rates / RPTPOST NOTHING TIME WBHP WOPR WWPR WWCT WOPT WWPT WEFAC WWIR WWIT WLPR WLPT / We save consolidated series report for POSTWELL wells. '*' / / END ######################################################################